Compare Adtran ATLAS™ 800 (1200185L3) Multiplexer to Adtran Total Access OPTI-MX Multiplexer (1184515L1)

The Quad T1/PRI module combines with other ATLAS components to implement a variety of WAN access products, including a T1 Bandwidth Manager, an ISDN Access Switch, and a Digital Access Cross-Connect System (DACS). The module provides four network ports, each of which can be independently configured to operate in T1 (DS-1 or DSX-1) or Primary Rate ISDN (PRI) modes. ??The Quad T1/PRI module can perform T1 to PRI conversion, translating between the robbed-bit signaling presented in a channelized T1 circuit and the D-channel signaling of a PRI circuit. When using the Quad T1/PRI module, ATLAS operates in a DACS mode supporting DS0 time slot interchange and DS0 grooming while preserving robbed bit signaling. ATLAS can be fully populated with Quad T1/PRI modules to support a pure DACSing application of 34 T1 circuits. Configuration of the Quad T1/PRI module can be accomplished through a variety of mechanisms, including Telnet or VT 100 Emulation. SNMP management is supported for alarm an... Less

The Total Access OPTI-MX OMM3IR Module terminates the OC-3 fiber circuit(s) to feed the OPTI-MX Chassis. It operates only in Terminal mode. It converts the optical signal into digital electrical signals for distribution through the backplane to the Tributary modules. Less