> upc 816909047424

This UPC commercial shoplight fixture provides a complete lighting solution. Bulb Type: T5 fluorescent, Bulbs (qty.): 4, Watts: 28, Dimensions L x W x H (in.): 46 1/2 x 16 1/2 x 4 1/2 Complete li...

For more than 50 years, Cambro has been growing and enhancing their product lines, including the industry standard, Camtray. Cambro also manufactures highly sought after products like the Camcarrier that holds and insulates food during transportation. M

Chief Manufacturing UPC13 Chief's customized UPC Series Projector Mount offers the best-looking and most functional installation possible for projectors that must be mounted upright in the ceiling. Each UPC projector mount includes a bracket that is custom designed to fit the contour of your projector, giving you the lowest profile support possible. The UPC customized brackets also save you valuable projector maintenance time by providing easy access to the lamp and filter. Custom design of most UPC Projector Brackets provides needed access for: -Quick lamp changes -Easy filter cleaning -Good projector ventilation -Overall Dimensions: 1-3/4"H x 6-1/4"W x 5-1/2"D QUICK PROJECTOR DISCONNECT/RECONN ECT Quickly and easily remove the projector from the ceiling by loosening the thumb nuts on the bracket portion of the mount; lift up and off removing projector and hanger bracket. This feature makes lamp changes, lens and filter cleaning or projector servicing quicker and easier without losing registration. ROLL, PITCH AND YAW ADJUSTMENTS Fast and precise image registration is achieved through the easy roll, pitch and yaw adjustments built into the RPA mounts. +/-4 Degrees Roll Adjustment can be made on each side of the mount using a standard philips screwdriver. Loosen screw, adjust mount and tighten screw to hold adjustment. +/-25 Degrees Pitch Adjustment is accomplished by adjusting the pitch adjustment screws on either side of the mount. 180 Degree Yaw Adjustment can be made by turning mount on threaded column. THREE CEILING MOUNTING METHODS Three different mounting methods provide a quick, secure ceiling installation for your application. -FLUSH MOUNT to suitable ceilings using the four corner slots in top of RPA mount. (Hardware not included.) -1/4" THREADED ROD using the four corner slots in top of RPA mount. (Threaded rod not included.) -NPT 1 1/2" THREADED PIPE COLUMN using threaded coupler at top of RPA mount. (Threaded pipe column not included.) WALL MOUNT OPTION In addition to the three ceiling mounting methods, you may attach an RPA mount to the wall using the WMA-300 Wall Mount Accessory Arm. Click Here for a full list of supported projectors and the style mount you should select. Chief warrants its products (excluding electric, gas cylinder, and one-way bearing mechanisms) to be free of defects in material and workmanship for 10 years. PLEASE NOTE: This item cannot be shipped to Puerto Rico UPC Projector Mount Installation Instructions About Chief Manufacturing For over a quarter of a century, Chief has been an industry leader in manufacturing total support solutions for presentation systems. Chief's commitment to responding to growing industry needs is evident through a full line of mounts, lifts, and accessories for LCD/DLP/CRT projectors and flat panels utilizing plasma and LCD technologies. Chief is known for producing the original Roll, Pitch, and Yaw adjustments in 1978 to make projector mount installation and registration quick and easy. Today, Chief continues to provide innovative mount features, including the first-ever seismic-rated LCD and plasma wall mounts. For the highest quality in AV mounting, no name is trusted more than Chief. All Chief products are designed and ma Model: UPC-13

Chief Manufacturing UPC14 Chief's customized UPC Series Projector Mount offers the best-looking and most functional installation possible for projectors that must be mounted upright in the ceiling. Each UPC projector mount includes a bracket that is custom designed to fit the contour of your projector, giving you the lowest profile support possible. The UPC customized brackets also save you valuable projector maintenance time by providing easy access to the lamp and filter. Custom design of most UPC Projector Brackets provides needed access for: -Quick lamp changes -Easy filter cleaning -Good projector ventilation -Overall Dimensions: 1-3/4"H x 6-1/4"W x 5-1/2"D QUICK PROJECTOR DISCONNECT/RECONN ECT Quickly and easily remove the projector from the ceiling by loosening the thumb nuts on the bracket portion of the mount; lift up and off removing projector and hanger bracket. This feature makes lamp changes, lens and filter cleaning or projector servicing quicker and easier without losing registration. ROLL, PITCH AND YAW ADJUSTMENTS Fast and precise image registration is achieved through the easy roll, pitch and yaw adjustments built into the RPA mounts. +/-4 Degrees Roll Adjustment can be made on each side of the mount using a standard philips screwdriver. Loosen screw, adjust mount and tighten screw to hold adjustment. +/-25 Degrees Pitch Adjustment is accomplished by adjusting the pitch adjustment screws on either side of the mount. 180 Degree Yaw Adjustment can be made by turning mount on threaded column. THREE CEILING MOUNTING METHODS Three different mounting methods provide a quick, secure ceiling installation for your application. -FLUSH MOUNT to suitable ceilings using the four corner slots in top of RPA mount. (Hardware not included.) -1/4" THREADED ROD using the four corner slots in top of RPA mount. (Threaded rod not included.) -NPT 1 1/2" THREADED PIPE COLUMN using threaded coupler at top of RPA mount. (Threaded pipe column not included.) WALL MOUNT OPTION In addition to the three ceiling mounting methods, you may attach an RPA mount to the wall using the WMA-300 Wall Mount Accessory Arm. Click Here for a full list of supported projectors and the style mount you should select. Chief warrants its products (excluding electric, gas cylinder, and one-way bearing mechanisms) to be free of defects in material and workmanship for 10 years. PLEASE NOTE: This item cannot be shipped to Puerto Rico UPC Projector Mount Installation Instructions About Chief Manufacturing For over a quarter of a century, Chief has been an industry leader in manufacturing total support solutions for presentation systems. Chief's commitment to responding to growing industry needs is evident through a full line of mounts, lifts, and accessories for LCD/DLP/CRT projectors and flat panels utilizing plasma and LCD technologies. Chief is known for producing the original Roll, Pitch, and Yaw adjustments in 1978 to make projector mount installation and registration quick and easy. Today, Chief continues to provide innovative mount features, including the first-ever seismic-rated LCD and plasma wall mounts. For the highest quality in AV mounting, no name is trusted more than Chief. All Chief products are designed and ma Model: UPC-14

Chief Manufacturing UPC10 Chief's customized UPC Series Projector Mount offers the best-looking and most functional installation possible for projectors that must be mounted upright in the ceiling. Each UPC projector mount includes a bracket that is custom designed to fit the contour of your projector, giving you the lowest profile support possible. The UPC customized brackets also save you valuable projector maintenance time by providing easy access to the lamp and filter. Custom design of most UPC Projector Brackets provides needed access for: -Quick lamp changes -Easy filter cleaning -Good projector ventilation -Overall Dimensions: 1-3/4"H x 6-1/4"W x 5-1/2"D QUICK PROJECTOR DISCONNECT/RECONN ECT Quickly and easily remove the projector from the ceiling by loosening the thumb nuts on the bracket portion of the mount; lift up and off removing projector and hanger bracket. This feature makes lamp changes, lens and filter cleaning or projector servicing quicker and easier without losing registration. ROLL, PITCH AND YAW ADJUSTMENTS Fast and precise image registration is achieved through the easy roll, pitch and yaw adjustments built into the RPA mounts. +/-4 Degrees Roll Adjustment can be made on each side of the mount using a standard philips screwdriver. Loosen screw, adjust mount and tighten screw to hold adjustment. +/-25 Degrees Pitch Adjustment is accomplished by adjusting the pitch adjustment screws on either side of the mount. 180 Degree Yaw Adjustment can be made by turning mount on threaded column. THREE CEILING MOUNTING METHODS Three different mounting methods provide a quick, secure ceiling installation for your application. -FLUSH MOUNT to suitable ceilings using the four corner slots in top of RPA mount. (Hardware not included.) -1/4" THREADED ROD using the four corner slots in top of RPA mount. (Threaded rod not included.) -NPT 1 1/2" THREADED PIPE COLUMN using threaded coupler at top of RPA mount. (Threaded pipe column not included.) WALL MOUNT OPTION In addition to the three ceiling mounting methods, you may attach an RPA mount to the wall using the WMA-300 Wall Mount Accessory Arm. Click Here for a full list of supported projectors and the style mount you should select. Chief warrants its products (excluding electric, gas cylinder, and one-way bearing mechanisms) to be free of defects in material and workmanship for 10 years. PLEASE NOTE: This item cannot be shipped to Puerto Rico UPC Projector Mount Installation Instructions About Chief Manufacturing For over a quarter of a century, Chief has been an industry leader in manufacturing total support solutions for presentation systems. Chief's commitment to responding to growing industry needs is evident through a full line of mounts, lifts, and accessories for LCD/DLP/CRT projectors and flat panels utilizing plasma and LCD technologies. Chief is known for producing the original Roll, Pitch, and Yaw adjustments in 1978 to make projector mount installation and registration quick and easy. Today, Chief continues to provide innovative mount features, including the first-ever seismic-rated LCD and plasma wall mounts. For the highest quality in AV mounting, no name is trusted more than Chief. All Chief products are designed and ma Model: UPC-10

Chief Manufacturing UPC15 Chief's customized UPC Series Projector Mount offers the best-looking and most functional installation possible for projectors that must be mounted upright in the ceiling. Each UPC projector mount includes a bracket that is custom designed to fit the contour of your projector, giving you the lowest profile support possible. The UPC customized brackets also save you valuable projector maintenance time by providing easy access to the lamp and filter. Custom design of most UPC Projector Brackets provides needed access for: -Quick lamp changes -Easy filter cleaning -Good projector ventilation -Overall Dimensions: 1-3/4"H x 6-1/4"W x 5-1/2"D QUICK PROJECTOR DISCONNECT/RECONN ECT Quickly and easily remove the projector from the ceiling by loosening the thumb nuts on the bracket portion of the mount; lift up and off removing projector and hanger bracket. This feature makes lamp changes, lens and filter cleaning or projector servicing quicker and easier without losing registration. ROLL, PITCH AND YAW ADJUSTMENTS Fast and precise image registration is achieved through the easy roll, pitch and yaw adjustments built into the RPA mounts. +/-4 Degrees Roll Adjustment can be made on each side of the mount using a standard philips screwdriver. Loosen screw, adjust mount and tighten screw to hold adjustment. +/-25 Degrees Pitch Adjustment is accomplished by adjusting the pitch adjustment screws on either side of the mount. 180 Degree Yaw Adjustment can be made by turning mount on threaded column. THREE CEILING MOUNTING METHODS Three different mounting methods provide a quick, secure ceiling installation for your application. -FLUSH MOUNT to suitable ceilings using the four corner slots in top of RPA mount. (Hardware not included.) -1/4" THREADED ROD using the four corner slots in top of RPA mount. (Threaded rod not included.) -NPT 1 1/2" THREADED PIPE COLUMN using threaded coupler at top of RPA mount. (Threaded pipe column not included.) WALL MOUNT OPTION In addition to the three ceiling mounting methods, you may attach an RPA mount to the wall using the WMA-300 Wall Mount Accessory Arm. Click Here for a full list of supported projectors and the style mount you should select. Chief warrants its products (excluding electric, gas cylinder, and one-way bearing mechanisms) to be free of defects in material and workmanship for 10 years. PLEASE NOTE: This item cannot be shipped to Puerto Rico UPC Projector Mount Installation Instructions About Chief Manufacturing For over a quarter of a century, Chief has been an industry leader in manufacturing total support solutions for presentation systems. Chief's commitment to responding to growing industry needs is evident through a full line of mounts, lifts, and accessories for LCD/DLP/CRT projectors and flat panels utilizing plasma and LCD technologies. Chief is known for producing the original Roll, Pitch, and Yaw adjustments in 1978 to make projector mount installation and registration quick and easy. Today, Chief continues to provide innovative mount features, including the first-ever seismic-rated LCD and plasma wall mounts. For the highest quality in AV mounting, no name is trusted more than Chief. All Chief products are designed and ma Model: UPC-15

Chief Manufacturing UPC16 Chief's customized UPC Series Projector Mount offers the best-looking and most functional installation possible for projectors that must be mounted upright in the ceiling. Each UPC projector mount includes a bracket that is custom designed to fit the contour of your projector, giving you the lowest profile support possible. The UPC customized brackets also save you valuable projector maintenance time by providing easy access to the lamp and filter. Custom design of most UPC Projector Brackets provides needed access for: -Quick lamp changes -Easy filter cleaning -Good projector ventilation -Overall Dimensions: 1-3/4"H x 6-1/4"W x 5-1/2"D QUICK PROJECTOR DISCONNECT/RECONN ECT Quickly and easily remove the projector from the ceiling by loosening the thumb nuts on the bracket portion of the mount; lift up and off removing projector and hanger bracket. This feature makes lamp changes, lens and filter cleaning or projector servicing quicker and easier without losing registration. ROLL, PITCH AND YAW ADJUSTMENTS Fast and precise image registration is achieved through the easy roll, pitch and yaw adjustments built into the RPA mounts. +/-4 Degrees Roll Adjustment can be made on each side of the mount using a standard philips screwdriver. Loosen screw, adjust mount and tighten screw to hold adjustment. +/-25 Degrees Pitch Adjustment is accomplished by adjusting the pitch adjustment screws on either side of the mount. 180 Degree Yaw Adjustment can be made by turning mount on threaded column. THREE CEILING MOUNTING METHODS Three different mounting methods provide a quick, secure ceiling installation for your application. -FLUSH MOUNT to suitable ceilings using the four corner slots in top of RPA mount. (Hardware not included.) -1/4" THREADED ROD using the four corner slots in top of RPA mount. (Threaded rod not included.) -NPT 1 1/2" THREADED PIPE COLUMN using threaded coupler at top of RPA mount. (Threaded pipe column not included.) WALL MOUNT OPTION In addition to the three ceiling mounting methods, you may attach an RPA mount to the wall using the WMA-300 Wall Mount Accessory Arm. Click Here for a full list of supported projectors and the style mount you should select. Chief warrants its products (excluding electric, gas cylinder, and one-way bearing mechanisms) to be free of defects in material and workmanship for 10 years. PLEASE NOTE: This item cannot be shipped to Puerto Rico UPC Projector Mount Installation Instructions About Chief Manufacturing For over a quarter of a century, Chief has been an industry leader in manufacturing total support solutions for presentation systems. Chief's commitment to responding to growing industry needs is evident through a full line of mounts, lifts, and accessories for LCD/DLP/CRT projectors and flat panels utilizing plasma and LCD technologies. Chief is known for producing the original Roll, Pitch, and Yaw adjustments in 1978 to make projector mount installation and registration quick and easy. Today, Chief continues to provide innovative mount features, including the first-ever seismic-rated LCD and plasma wall mounts. For the highest quality in AV mounting, no name is trusted more than Chief. All Chief products are designed and ma Model: UPC-16

PLEASE READ AND UNDERSTAND COMPLETE DESCRIPTION BEFORE BIDDING. ASK QUESTIONS. IF THERE IS A PROBLEM, CONTACT US FIRST . WE ARE NOT OGRES! LET'S TALK ABOUT IT LIMITED TIME ONLY - BUY ONE UPC OR EAN-13 BARCODES FOR REGULAR PRICE OF $49.00 AND RECEIVE ANOTHER UPC OR EAN-13 BARCODE FREE ! Two for one deal is only good if you buy one for $49.00. This auction is for one (1) UPC or EAN Barcode and you will receive one (1) free if you buy the first one for $49.00. WHY BUY FROM LEGAL BARCODES? MANY REA

Chief Manufacturing UPC16 Chief's customized UPC Series Projector Mount offers the best-looking and most functional installation possible for projectors that must be mounted upright in the ceiling. Each UPC projector mount includes a bracket that is custom designed to fit the contour of your projector, giving you the lowest profile support possible. The UPC customized brackets also save you valuable projector maintenance time by providing easy access to the lamp and filter. Custom design of most UPC Projector Brackets provides needed access for: -Quick lamp changes -Easy filter cleaning -Good projector ventilation -Overall Dimensions: 1-3/4"H x 6-1/4"W x 5-1/2"D QUICK PROJECTOR DISCONNECT/RECONN ECT Quickly and easily remove the projector from the ceiling by loosening the thumb nuts on the bracket portion of the mount; lift up and off removing projector and hanger bracket. This feature makes lamp changes, lens and filter cleaning or projector servicing quicker and easier without losing registration. ROLL, PITCH AND YAW ADJUSTMENTS Fast and precise image registration is achieved through the easy roll, pitch and yaw adjustments built into the RPA mounts. +/-4 Degrees Roll Adjustment can be made on each side of the mount using a standard philips screwdriver. Loosen screw, adjust mount and tighten screw to hold adjustment. +/-25 Degrees Pitch Adjustment is accomplished by adjusting the pitch adjustment screws on either side of the mount. 180 Degree Yaw Adjustment can be made by turning mount on threaded column. THREE CEILING MOUNTING METHODS Three different mounting methods provide a quick, secure ceiling installation for your application. -FLUSH MOUNT to suitable ceilings using the four corner slots in top of RPA mount. (Hardware not included.) -1/4" THREADED ROD using the four corner slots in top of RPA mount. (Threaded rod not included.) -NPT 1 1/2" THREADED PIPE COLUMN using threaded coupler at top of RPA mount. (Threaded pipe column not included.) WALL MOUNT OPTION In addition to the three ceiling mounting methods, you may attach an RPA mount to the wall using the WMA-300 Wall Mount Accessory Arm. Click Here for a full list of supported projectors and the style mount you should select. Chief warrants its products (excluding electric, gas cylinder, and one-way bearing mechanisms) to be free of defects in material and workmanship for 10 years. PLEASE NOTE: This item cannot be shipped to Puerto Rico UPC Projector Mount Installation Instructions About Chief Manufacturing For over a quarter of a century, Chief has been an industry leader in manufacturing total support solutions for presentation systems. Chief's commitment to responding to growing industry needs is evident through a full line of mounts, lifts, and accessories for LCD/DLP/CRT projectors and flat panels utilizing plasma and LCD technologies. Chief is known for producing the original Roll, Pitch, and Yaw adjustments in 1978 to make projector mount installation and registration quick and easy. Today, Chief continues to provide innovative mount features, including the first-ever seismic-rated LCD and plasma wall mounts. For the highest quality in AV mounting, no name is trusted more than Chief. All Chief products are designed and ma Model: UPC-16

Chief Manufacturing UPC14 Chief's customized UPC Series Projector Mount offers the best-looking and most functional installation possible for projectors that must be mounted upright in the ceiling. Each UPC projector mount includes a bracket that is custom designed to fit the contour of your projector, giving you the lowest profile support possible. The UPC customized brackets also save you valuable projector maintenance time by providing easy access to the lamp and filter. Custom design of most UPC Projector Brackets provides needed access for: -Quick lamp changes -Easy filter cleaning -Good projector ventilation -Overall Dimensions: 1-3/4"H x 6-1/4"W x 5-1/2"D QUICK PROJECTOR DISCONNECT/RECONN ECT Quickly and easily remove the projector from the ceiling by loosening the thumb nuts on the bracket portion of the mount; lift up and off removing projector and hanger bracket. This feature makes lamp changes, lens and filter cleaning or projector servicing quicker and easier without losing registration. ROLL, PITCH AND YAW ADJUSTMENTS Fast and precise image registration is achieved through the easy roll, pitch and yaw adjustments built into the RPA mounts. +/-4 Degrees Roll Adjustment can be made on each side of the mount using a standard philips screwdriver. Loosen screw, adjust mount and tighten screw to hold adjustment. +/-25 Degrees Pitch Adjustment is accomplished by adjusting the pitch adjustment screws on either side of the mount. 180 Degree Yaw Adjustment can be made by turning mount on threaded column. THREE CEILING MOUNTING METHODS Three different mounting methods provide a quick, secure ceiling installation for your application. -FLUSH MOUNT to suitable ceilings using the four corner slots in top of RPA mount. (Hardware not included.) -1/4" THREADED ROD using the four corner slots in top of RPA mount. (Threaded rod not included.) -NPT 1 1/2" THREADED PIPE COLUMN using threaded coupler at top of RPA mount. (Threaded pipe column not included.) WALL MOUNT OPTION In addition to the three ceiling mounting methods, you may attach an RPA mount to the wall using the WMA-300 Wall Mount Accessory Arm. Click Here for a full list of supported projectors and the style mount you should select. Chief warrants its products (excluding electric, gas cylinder, and one-way bearing mechanisms) to be free of defects in material and workmanship for 10 years. PLEASE NOTE: This item cannot be shipped to Puerto Rico UPC Projector Mount Installation Instructions About Chief Manufacturing For over a quarter of a century, Chief has been an industry leader in manufacturing total support solutions for presentation systems. Chief's commitment to responding to growing industry needs is evident through a full line of mounts, lifts, and accessories for LCD/DLP/CRT projectors and flat panels utilizing plasma and LCD technologies. Chief is known for producing the original Roll, Pitch, and Yaw adjustments in 1978 to make projector mount installation and registration quick and easy. Today, Chief continues to provide innovative mount features, including the first-ever seismic-rated LCD and plasma wall mounts. For the highest quality in AV mounting, no name is trusted more than Chief. All Chief products are designed and ma Model: UPC-14

Chief Manufacturing UPC13 Chief's customized UPC Series Projector Mount offers the best-looking and most functional installation possible for projectors that must be mounted upright in the ceiling. Each UPC projector mount includes a bracket that is custom designed to fit the contour of your projector, giving you the lowest profile support possible. The UPC customized brackets also save you valuable projector maintenance time by providing easy access to the lamp and filter. Custom design of most UPC Projector Brackets provides needed access for: -Quick lamp changes -Easy filter cleaning -Good projector ventilation -Overall Dimensions: 1-3/4"H x 6-1/4"W x 5-1/2"D QUICK PROJECTOR DISCONNECT/RECONN ECT Quickly and easily remove the projector from the ceiling by loosening the thumb nuts on the bracket portion of the mount; lift up and off removing projector and hanger bracket. This feature makes lamp changes, lens and filter cleaning or projector servicing quicker and easier without losing registration. ROLL, PITCH AND YAW ADJUSTMENTS Fast and precise image registration is achieved through the easy roll, pitch and yaw adjustments built into the RPA mounts. +/-4 Degrees Roll Adjustment can be made on each side of the mount using a standard philips screwdriver. Loosen screw, adjust mount and tighten screw to hold adjustment. +/-25 Degrees Pitch Adjustment is accomplished by adjusting the pitch adjustment screws on either side of the mount. 180 Degree Yaw Adjustment can be made by turning mount on threaded column. THREE CEILING MOUNTING METHODS Three different mounting methods provide a quick, secure ceiling installation for your application. -FLUSH MOUNT to suitable ceilings using the four corner slots in top of RPA mount. (Hardware not included.) -1/4" THREADED ROD using the four corner slots in top of RPA mount. (Threaded rod not included.) -NPT 1 1/2" THREADED PIPE COLUMN using threaded coupler at top of RPA mount. (Threaded pipe column not included.) WALL MOUNT OPTION In addition to the three ceiling mounting methods, you may attach an RPA mount to the wall using the WMA-300 Wall Mount Accessory Arm. Click Here for a full list of supported projectors and the style mount you should select. Chief warrants its products (excluding electric, gas cylinder, and one-way bearing mechanisms) to be free of defects in material and workmanship for 10 years. PLEASE NOTE: This item cannot be shipped to Puerto Rico UPC Projector Mount Installation Instructions About Chief Manufacturing For over a quarter of a century, Chief has been an industry leader in manufacturing total support solutions for presentation systems. Chief's commitment to responding to growing industry needs is evident through a full line of mounts, lifts, and accessories for LCD/DLP/CRT projectors and flat panels utilizing plasma and LCD technologies. Chief is known for producing the original Roll, Pitch, and Yaw adjustments in 1978 to make projector mount installation and registration quick and easy. Today, Chief continues to provide innovative mount features, including the first-ever seismic-rated LCD and plasma wall mounts. For the highest quality in AV mounting, no name is trusted more than Chief. All Chief products are designed and ma Model: UPC-13

Chief Manufacturing UPC10 Chief's customized UPC Series Projector Mount offers the best-looking and most functional installation possible for projectors that must be mounted upright in the ceiling. Each UPC projector mount includes a bracket that is custom designed to fit the contour of your projector, giving you the lowest profile support possible. The UPC customized brackets also save you valuable projector maintenance time by providing easy access to the lamp and filter. Custom design of most UPC Projector Brackets provides needed access for: -Quick lamp changes -Easy filter cleaning -Good projector ventilation -Overall Dimensions: 1-3/4"H x 6-1/4"W x 5-1/2"D QUICK PROJECTOR DISCONNECT/RECONN ECT Quickly and easily remove the projector from the ceiling by loosening the thumb nuts on the bracket portion of the mount; lift up and off removing projector and hanger bracket. This feature makes lamp changes, lens and filter cleaning or projector servicing quicker and easier without losing registration. ROLL, PITCH AND YAW ADJUSTMENTS Fast and precise image registration is achieved through the easy roll, pitch and yaw adjustments built into the RPA mounts. +/-4 Degrees Roll Adjustment can be made on each side of the mount using a standard philips screwdriver. Loosen screw, adjust mount and tighten screw to hold adjustment. +/-25 Degrees Pitch Adjustment is accomplished by adjusting the pitch adjustment screws on either side of the mount. 180 Degree Yaw Adjustment can be made by turning mount on threaded column. THREE CEILING MOUNTING METHODS Three different mounting methods provide a quick, secure ceiling installation for your application. -FLUSH MOUNT to suitable ceilings using the four corner slots in top of RPA mount. (Hardware not included.) -1/4" THREADED ROD using the four corner slots in top of RPA mount. (Threaded rod not included.) -NPT 1 1/2" THREADED PIPE COLUMN using threaded coupler at top of RPA mount. (Threaded pipe column not included.) WALL MOUNT OPTION In addition to the three ceiling mounting methods, you may attach an RPA mount to the wall using the WMA-300 Wall Mount Accessory Arm. Click Here for a full list of supported projectors and the style mount you should select. Chief warrants its products (excluding electric, gas cylinder, and one-way bearing mechanisms) to be free of defects in material and workmanship for 10 years. PLEASE NOTE: This item cannot be shipped to Puerto Rico UPC Projector Mount Installation Instructions About Chief Manufacturing For over a quarter of a century, Chief has been an industry leader in manufacturing total support solutions for presentation systems. Chief's commitment to responding to growing industry needs is evident through a full line of mounts, lifts, and accessories for LCD/DLP/CRT projectors and flat panels utilizing plasma and LCD technologies. Chief is known for producing the original Roll, Pitch, and Yaw adjustments in 1978 to make projector mount installation and registration quick and easy. Today, Chief continues to provide innovative mount features, including the first-ever seismic-rated LCD and plasma wall mounts. For the highest quality in AV mounting, no name is trusted more than Chief. All Chief products are designed and ma Model: UPC-10

Chief Manufacturing UPC15 Chief's customized UPC Series Projector Mount offers the best-looking and most functional installation possible for projectors that must be mounted upright in the ceiling. Each UPC projector mount includes a bracket that is custom designed to fit the contour of your projector, giving you the lowest profile support possible. The UPC customized brackets also save you valuable projector maintenance time by providing easy access to the lamp and filter. Custom design of most UPC Projector Brackets provides needed access for: -Quick lamp changes -Easy filter cleaning -Good projector ventilation -Overall Dimensions: 1-3/4"H x 6-1/4"W x 5-1/2"D QUICK PROJECTOR DISCONNECT/RECONN ECT Quickly and easily remove the projector from the ceiling by loosening the thumb nuts on the bracket portion of the mount; lift up and off removing projector and hanger bracket. This feature makes lamp changes, lens and filter cleaning or projector servicing quicker and easier without losing registration. ROLL, PITCH AND YAW ADJUSTMENTS Fast and precise image registration is achieved through the easy roll, pitch and yaw adjustments built into the RPA mounts. +/-4 Degrees Roll Adjustment can be made on each side of the mount using a standard philips screwdriver. Loosen screw, adjust mount and tighten screw to hold adjustment. +/-25 Degrees Pitch Adjustment is accomplished by adjusting the pitch adjustment screws on either side of the mount. 180 Degree Yaw Adjustment can be made by turning mount on threaded column. THREE CEILING MOUNTING METHODS Three different mounting methods provide a quick, secure ceiling installation for your application. -FLUSH MOUNT to suitable ceilings using the four corner slots in top of RPA mount. (Hardware not included.) -1/4" THREADED ROD using the four corner slots in top of RPA mount. (Threaded rod not included.) -NPT 1 1/2" THREADED PIPE COLUMN using threaded coupler at top of RPA mount. (Threaded pipe column not included.) WALL MOUNT OPTION In addition to the three ceiling mounting methods, you may attach an RPA mount to the wall using the WMA-300 Wall Mount Accessory Arm. Click Here for a full list of supported projectors and the style mount you should select. Chief warrants its products (excluding electric, gas cylinder, and one-way bearing mechanisms) to be free of defects in material and workmanship for 10 years. PLEASE NOTE: This item cannot be shipped to Puerto Rico UPC Projector Mount Installation Instructions About Chief Manufacturing For over a quarter of a century, Chief has been an industry leader in manufacturing total support solutions for presentation systems. Chief's commitment to responding to growing industry needs is evident through a full line of mounts, lifts, and accessories for LCD/DLP/CRT projectors and flat panels utilizing plasma and LCD technologies. Chief is known for producing the original Roll, Pitch, and Yaw adjustments in 1978 to make projector mount installation and registration quick and easy. Today, Chief continues to provide innovative mount features, including the first-ever seismic-rated LCD and plasma wall mounts. For the highest quality in AV mounting, no name is trusted more than Chief. All Chief products are designed and ma Model: UPC-15

Connect your fiber network devices with 40 Meters of SC/UPC - SC/UPC Single mode 3.0nm fiber patch cable.

Connect your fiber network devices with 50 Meters of SC/UPC - SC/UPC Single mode 3.0nm fiber patch cable.

45 Meter SC/UPC-SC/UPC Singlemode Fiber Optic Risor Cable

GE 40 watt 22.5" T12 Medium Bi-Pin (G13) Base 4,100K Super Cool White Mod-U-Line U-Bend Fluorescent GE Light Bulb UPC Code (F40SCW/U6/UPC 25374)

Color printing pack for the UP-1000 series printers. One pack includes print paper and cartridge. 100 prints per pack. Color print pack for the UP-1000 series printer VP standard Paper size 4" x 5 5/8" UP- 1200R/1200A/1/ 1800 max. Image size: 4 11/16" x 3 7/16" UP-D1500CN/2 max. image size: 3 5/8" x 4 3/4" One pack includes paper and ink ribbon to make 100 prints Three pass process (CMY)

Color Print Pack. One pack includes 2 bags of print paper and ink ribbon, 200 prints per pack (100 per bag) Color print pack for the UP-5500, UP-D5500, UP-5600MD, and UP-5600MDU printers 5 7/8" x 8 3/8" paper size UP-5500 Image size: 5" x 6 1/2" UP-D5500 Image size: 5 1/4" x 7" One pack includes paper and ink ribbon to make 200 prints Three pass process (CMY) Note: One universal re-usable ribbon cartridge is supplied with the printer

GE 95 watt 96" T12 Recessed Double Contact (R17d) Base Cool White 4,100K Watt Miser UPC High Output Rapid Start Fluorescent GE Light Bulb (F96T12/CW/HO/WM/ UPC 21714)